How to Make a Wood Bead Chandelier
Supplies Needed
White stringScissorsEmbroidery needleApproximately 500 wood beadsDiagonal pliers14-inch lampshade ringNeedle nose pliers12-inch embroidery hoopPendant light kit
Step-by-Step Directions
With a few supplies and these how-to instructions, you can create your own wood bead chandelier. If you have leftover wood beads, try creating a colorful yarn and bead chandelier.
Step 1: String Beads
For this pretty pendant, gather about 500 beads—ranging from ½ to 1½ inches in diameter—and measure three 16-inch lengths of string for a total of about 48 feet. Knot one end and begin threading beads, randomly alternating between sizes to create a dynamic look. Leave an 18-inch tail and knot the end when finished stringing.
Step 2: Prep Bracket
Use diagonal pliers to remove cross bracing from a 14-inch lampshade ring. Discard the outer lampshade ring and use needle nose pliers ($13, The Home Depot) to turn up the four ends of the cross brace 1 inch. Remove the inner ring from a 12-inch embroidery hoop. Rest inner portion of embroidery hoop onto cross bracing. Fit pendant light hardware (we used this Blush Single Pendant, $82, Color Cord Company) through the center of the cross brace.
Step 3: Hang Beads
To hang the bead strands, it’s easiest to suspend the hoop from a secured bracket like a closet bar. Tie one end of the string to the hoop and begin looping the strand over and under the hoop, allowing space between the beads to drape over the hoop and creating a series of intertwining swags. Tie the end of the string to the hoop and cut excess. Place the outside hoop around the inner one to cover the string, and tighten the hoop screw. Finish installing the light according to the pendant light kit instructions and adjust beads so the wood bead chandelier is level.
